ma 250W / 120V Donut Immersion Heater - non coated16311-NC
Non-Coated - It's best to remove immersion heaters from fountains when chance of freezing is over.
|
|
mb 250W / 120V Donut Immersion Heater - coated16311-C
This Heater is Covered With a Protective Teflon Coating - But it's still best to remove it from the fountain when chance of freezing weather is over.
|
|
oc Water Supply Winterize KitWSWK
Winterizes Water Supply Lines (2-piece kit)
|
|
qaf 2" Silicone Drain Plug (#11) for Thriftykings, some Watermasters18219
This is the 2" Silicone Drain Plug (#11) used on Watermaster 54D, 600, ThriftyKing Fountains - CT's & Hg's.
|
|
sca 3/4" Watermatic Float / Valve Assy34WMFVA
3/4" 40-60 psi float valve assembly for the Watermatic 300, 1000, Watermaster 54, 54D, 90, 96, 600, 1200, Cattlemaster 480, 840, 1440, 10T and the Thriftyking CT 2 & 4.
|
|
scb 3/4" Male White Valve (5-40 psi)16697
3/4" 40-60 psi white float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scc 3/4" Male Red Valve (40-60 psi)11101
3/4" 40-60 psi red float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scd 3/4" Male Red Valve w/ 1/8" CF Side Tap (40-60 psi)11142
3/4" 40-60 psi red float valve with 1/8" constant flow side tap - it could be used on any fountain that uses the 3/4" male valve.
|
|
sce 1/8"mpt x 1/4"comp Brass Angle Needle Pitcock Valve11793
This is the brass 1/8"mpt x 1/4"comp angle needle pitcock valve used with the 11142 side tapped float valve to make the fountain able to heat itself by the "constant flow" method.
|
|
scf 3/4" Male Green Valve (60-80 psi)15377
3/4" 60-80 psi greem float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scg 3/4" Male Blue Valve (80-100 psi)18197
-Discontinued-
3/4" 80-100 psi blue float valve which can be used on any fountain that uses the 3/4" male valve. Order the new 18832 high pressure valve & float assembly instead.
|
|
sda Inlet Pkg For 3/4" Male White Valve18626
3/4" Inlet Package for the White Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians.
|
|
sdb Inlet Pkg For 3/4" Male Red Valve18606
3/4" Inlet Package for the Red Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians.
|
|
sdc Inlet Pkg For 3/4" Male Green Valve18622
3/4" Inlet Package for the Green Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians.
|
|
sfd 3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket15259
3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket. This is the only way you can purchase the 3/4" valve plunger with rubber button.
|
|
sfe 3/4" Valve Nosepiece Gaskets (5 per package)18397
3/4" Valve nose-piece gaskets (5 per package). Used on 3/4" valves throughout the larger fountains. In the old days, this gasket was not used.
|
|
sff 3/4" Valve Rubber Buttons (10 per package)15152
3/4" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item.
|
|
sgb 3/4"fpt x 3/4"fpt Bulkhead Package w/ Nut and Gasket16898
3/4"fpt x 3/4"fpt Bulkhead Package w/ Nut and Gasket.
|
|
sgc 3/4"fpt x 5/8"barb Elbowing Bulkhead Package w/ Nut and Gasket16898
3/4"fpt x 5/8"barb Elbowing Bulkhead Package w/ Nut and Gasket.
|
|
sv 1/4"mpt x 1/4"comp PVC Angle Pitcock Valve Pkg (includes 3/4"x 1/4" bushing)18458
This is the PVC 1/4"mpt x 1/4"comp angle pitcock valve used with the larger fountain plumbings where a 3/4" threaded tee, bushing, and this valve was used to achieve the constant flow feature.
|
|