|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Parts most often needed for the Ritchie Thriftyking CT2 fountains...
ma 250W / 120V Donut Immersion Heater - non coated .jpg) 16311-NCNon-Coated - It's best to remove immersion heaters from fountains when chance of freezing is over. |
mb 250W / 120V Donut Immersion Heater - coated  16311-CThis Heater is Covered With a Protective Teflon Coating - But it's still best to remove it from the fountain when chance of freezing weather is over. |
na Deluxe Small Fountain Installation Kit .jpg) DSFIKInstalls Watermatics, Ecofounts, Omni 1,2,3, and CT1 with stainless bolts, ball valve, & insulation for lines |
nb Small Fountain Installation Kit .jpg) SFIKPipe Insulation Not Included - Order # DWMIK if you need insulation too. |
oc Water Supply Winterize Kit .jpg) WSWKWinterizes Water Supply Lines (2-piece kit) |
pa 3/4 x 1/2 Ball Valve Kit .jpg) 34x12BVKAmerican Made By The Spears Company |
qaf 2" Silicone Drain Plug (#11) for Thriftykings, some Watermasters  18219This is the 2" Silicone Drain Plug (#11) used on Watermaster 54D, 600, ThriftyKing Fountains - CT's & Hg's. |
sca 3/4" Watermatic Float / Valve Assy  34WMFVA3/4" 40-60 psi float valve assembly for the Watermatic 300, 1000, Watermaster 54, 54D, 90, 96, 600, 1200, Cattlemaster 480, 840, 1440, 10T and the Thriftyking CT 2 & 4. |
scb 3/4" Male White Valve (5-40 psi)  166973/4" 40-60 psi white float valve which can be used on any fountain that uses the 3/4" male valve. |
scc 3/4" Male Red Valve (40-60 psi)  111013/4" 40-60 psi red float valve which can be used on any fountain that uses the 3/4" male valve. |
scd 3/4" Male Red Valve w/ 1/8" CF Side Tap (40-60 psi)  111423/4" 40-60 psi red float valve with 1/8" constant flow side tap - it could be used on any fountain that uses the 3/4" male valve. |
sce 1/8"mpt x 1/4"comp Brass Angle Needle Pitcock Valve  11793This is the brass 1/8"mpt x 1/4"comp angle needle pitcock valve used with the 11142 side tapped float valve to make the fountain able to heat itself by the "constant flow" method. |
scf 3/4" Male Green Valve (60-80 psi)  153773/4" 60-80 psi greem float valve which can be used on any fountain that uses the 3/4" male valve. |
scg 3/4" Male Blue Valve (80-100 psi)  18197-Discontinued- 3/4" 80-100 psi blue float valve which can be used on any fountain that uses the 3/4" male valve. Order the new 18832 high pressure valve & float assembly instead. |
sda Inlet Pkg For 3/4" Male White Valve  186263/4" Inlet Package for the White Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians. |
sdb Inlet Pkg For 3/4" Male Red Valve  186063/4" Inlet Package for the Red Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians. |
sdc Inlet Pkg For 3/4" Male Green Valve  186223/4" Inlet Package for the Green Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians. |
sfd 3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket  152593/4" Valve Plunger Pkg with Button, Nose-piece & Gasket. This is the only way you can purchase the 3/4" valve plunger with rubber button. |
sfe 3/4" Valve Nosepiece Gaskets (5 per package)  183973/4" Valve nose-piece gaskets (5 per package). Used on 3/4" valves throughout the larger fountains. In the old days, this gasket was not used. |
sff 3/4" Valve Rubber Buttons (10 per package)  151523/4" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item. |
| 1 | 2 |
|
||||||||
Shortcuts: |
||
