qdc 2" Overflow pipe Assy with Nut & Gasket for Omni 3, 5, 1016629
2" Overflow pipe Assy with Nut & Gasket for Omni 3, 5, 10
|
|
qdd 2" Extended Overflow pipe Assy with Nut & Gasket for Cattlemasters18181
2" Extended Overflow pipe Assy with Nut & Gasket for CattleMaster Units
|
|
rb Ritchie Mini Water Meter18218
Know how much water your animal is consuming. The economical Mini Water Meter installs in the 3/8" rubber hose line of smaller fountains between the water source and the float valve.
|
|
saa 1/2" Watermatic Float / Valve Assy (with bracket included)12WMFVA
1/2" 40-60 psi float valve assembly for the Watermatic 100, 150, 150s&g, Ecofount 1 & 2.
|
|
sab 1/2" Male White Valve (5-40 psi)12574
1/2" 5-40 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sac 1/2" Male Red Valve (40-60 psi)12575
1/2" 40-60 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sad 1/2" Male Green Valve (60-80 psi)13597
1/2" 60-80 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sae 1/2" Valve Bracket Pkg with Screws11515
1/2" Valve Bracket Package with 4 Bolts/Screws. This bracket bolts to the side of many small fountains and gives you a 1/2" fpt thread to screw your 1/2" float valve into.
|
|
sag 1/2" Valve Rubber Buttons (10 per package)15151
1/2" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item (10 per package).
|
|
sag 1/2" Valve Wingnut / Screw / Star-washer Pkg12576
1/2" Valves have a small screw, star-washer, and wingnut that holds the float arm onto the float. It is also where you adjust the float and water level of the fountain. This part is small but necessary.
|
|
sah 1/2" Valve Bracket Pkg with Screws & Washers for StallFount II's18641
1/2" Valve Bracket Package with 2 screws and washers for the StallFount II's.
|
|
sba 1/2" Male Valve and Elbow Pkg for the CT 116899
1/2" float valve and 3/4"mpt x 1/2" fpt elbow (3/4" street ell & 3/4"mpt x 1/2"fpt bushing) which is used in the CT 1 fountain.
|
|
sca 3/4" Watermatic Float / Valve Assy34WMFVA
3/4" 40-60 psi float valve assembly for the Watermatic 300, 1000, Watermaster 54, 54D, 90, 96, 600, 1200, Cattlemaster 480, 840, 1440, 10T and the Thriftyking CT 2 & 4.
|
|
scb 3/4" Male White Valve (5-40 psi)16697
3/4" 40-60 psi white float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scc 3/4" Male Red Valve (40-60 psi)11101
3/4" 40-60 psi red float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scd 3/4" Male Red Valve w/ 1/8" CF Side Tap (40-60 psi)11142
3/4" 40-60 psi red float valve with 1/8" constant flow side tap - it could be used on any fountain that uses the 3/4" male valve.
|
|
sce 1/8"mpt x 1/4"comp Brass Angle Needle Pitcock Valve11793
This is the brass 1/8"mpt x 1/4"comp angle needle pitcock valve used with the 11142 side tapped float valve to make the fountain able to heat itself by the "constant flow" method.
|
|
scf 3/4" Male Green Valve (60-80 psi)15377
3/4" 60-80 psi greem float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scg 3/4" Male Blue Valve (80-100 psi)18197
-Discontinued-
3/4" 80-100 psi blue float valve which can be used on any fountain that uses the 3/4" male valve. Order the new 18832 high pressure valve & float assembly instead.
|
|
sda Inlet Pkg For 3/4" Male White Valve18626
3/4" Inlet Package for the White Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians.
|
|