|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Most often needed parts for a stainless steel basic stallfount in the non-heaed or heated models...
ac Stainess Steel Shroud Set P-V * P-O * PQR * Spec * V1 * V2 * Man  18092Stainless Shrouds (2-pieces - overlap for mounting heights up to 4') |
pa 3/4 x 1/2 Ball Valve Kit .jpg) 34x12BVKAmerican Made By The Spears Company |
qaa 11/2" Silicone Drain Plug for Stallfount & Omni 1, 2, 2sp  18221This is the 11/2" Silicone Drain Plug for Basic Stallfount & Omni 1, 2, 2sp |
rb Ritchie Mini Water Meter  18218Know how much water your animal is consuming. The economical Mini Water Meter installs in the 3/8" rubber hose line of smaller fountains between the water source and the float valve. |
sab 1/2" Male White Valve (5-40 psi)  125741/2" 5-40 psi float valve which can be used on any fountain that uses the 1/2" valve. |
sac 1/2" Male Red Valve (40-60 psi)  125751/2" 40-60 psi float valve which can be used on any fountain that uses the 1/2" valve. |
sad 1/2" Male Green Valve (60-80 psi)  135971/2" 60-80 psi float valve which can be used on any fountain that uses the 1/2" valve. |
sae 1/2" Valve Bracket Pkg with Screws  115151/2" Valve Bracket Package with 4 Bolts/Screws. This bracket bolts to the side of many small fountains and gives you a 1/2" fpt thread to screw your 1/2" float valve into. |
sag 1/2" Valve Rubber Buttons (10 per package)  151511/2" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item (10 per package). |
sag 1/2" Valve Wingnut / Screw / Star-washer Pkg  125761/2" Valves have a small screw, star-washer, and wingnut that holds the float arm onto the float. It is also where you adjust the float and water level of the fountain. This part is small but necessary. |
tb Plastic Pill-Shaped Float w/ Short Arm  13613Plastic Pill-Shaped Float with Short Arm for Basic Stainless Steel Stallfounts, Omni 1, 2, 2sp, & All Hog Founts. |
tc Short Plastic Float Arms for pill-shaped floats (2 per package)  18634Short Plastic Float Arms (2 per package) used on the Basic Stainless Steel Stallfounts, Omni 1, 2, 2sp, & All Hog Founts. |
ua 125 watt, 120 volt heating element  14150This is a 125 watt, 120 volt heating element used on all heated StallFounts, Ecofounts, Omni 1, 2, 2sp, and Pork King PK2, PK2-1, PK4. |
uh 48 watt, 120 volt cable heater  13830This is a 48 watt, 120 volt cable heater used on all heated StallFounts, EcoFounts, OminFounts, CattleMasters, and PorkKings. |
ui Self-limiting heat cable or heat tape - protects the water supply line  16276This is a self limiting heat cable or heat tape which warms up when temperature falls below 38 degrees. I can be used on the water supply of any fountain where power is available. |
um 28" Disc Thermostat  1188528" Disc Thermostat |
xa Stall Fount Accessory Package  18228 |
yea Basic 125 StallFount Cover / Non-Heated Trough Assembly  16877Basic 125 StallFount Cover / Non-Heated Trough Assembly |
yeb Basic 125 StallFount Cover / Heated Trough Assembly  18083Basic 125 StallFount Cover / Heated Trough Assembly |
|
||||||||
Shortcuts: |
||
