|
|
 |
|
 |
|
Parts most often needed for the Ritchie Thriftyking CT6 fountains...
PARTS / THRIFTYKING CT6
ma 250W / 120V Donut Immersion Heater - non coated (SKU: 16311-NC).jpg) 16311-NC
Non-Coated - It's best to remove immersion heaters from fountains when chance of freezing is over.
|
|
|
mb 250W / 120V Donut Immersion Heater - coated (SKU: 16311-C) 16311-C
This Heater is Covered With a Protective Teflon Coating - But it's still best to remove it from the fountain when chance of freezing weather is over.
|
|
|
oc Water Supply Winterize Kit (SKU: WSWK).jpg) WSWK
Winterizes Water Supply Lines (2-piece kit)
|
|
|
qaf 2" Silicone Drain Plug (#11) for Thriftykings, some Watermasters (SKU: 18219) 18219
This is the 2" Silicone Drain Plug (#11) used on Watermaster 54D, 600, ThriftyKing Fountains - CT's & Hg's.
|
|
|
sea 3/4" Female Red Valve (40-60 psi) (SKU: 12570) 12570
3/4" 40-60 psi Red Female float valve which can be used on any fountain that uses the 3/4" female valve.
|
|
|
seb 3/4" Female Green Valve (60-80 psi) (SKU: 16419) 16419
3/4" 60-80 psi red female float valve which can be used on any fountain that uses the 3/4" female valve. This would mostly be the ThriftyKing CT6.
|
|
|
sec 3/4" Female Blue Valve (80-100 psi) (SKU: 18195) 18195
-Discontinued-
3/4" 80-100 psi blue female float valve which can be used on any fountain that uses the 3/4" female valve. Order the new 18832 high pressure valve & float assembly instead.
|
|
|
sfa Inlet Pkg For 3/4" Female Red Valve (SKU: 18605) 18605
3/4" Inlet Package for the Red Female Valve. This piece would be found on the ThriftyKing CT6.
|
|
|
sfb Inlet Pkg For 3/4" Female Green Valve (SKU: 18623) 18623
3/4" Inlet Package for the Green Female Valve. This piece would be found on the ThriftyKing CT6.
|
|
|
sfc Inlet Pkg For 3/4" Female Blue Valve (SKU: 18627) 18627
3/4" 80-100psi Inlet Package for the Blue Female Valve. This piece would be found on the ThriftyKing CT6.
Order the new 18832 high pressure valve & float assembly instead.
|
|
|
sfd 3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket (SKU: 15259) 15259
3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket. This is the only way you can purchase the 3/4" valve plunger with rubber button.
|
|
|
sfe 3/4" Valve Nosepiece Gaskets (5 per package) (SKU: 18397) 18397
3/4" Valve nose-piece gaskets (5 per package). Used on 3/4" valves throughout the larger fountains. In the old days, this gasket was not used.
|
|
|
sff 3/4" Valve Rubber Buttons (10 per package) (SKU: 15152) 15152
3/4" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item.
|
|
|
sha Square Bossed Elbowing Float Valve and Constant Flow Heat Valve Assembly (SKU: 16464) 16464
Square Bossed Elbowing Bracket, Float Valve and Constant Flow Heat Valve Assembly. This is termed as a "Watermaster Valve Assembly" by Ritchie.
|
|
|
shb Square Bossed Elbowing 3/4"mpt x 5/8"barb Valve Mounting Bracket w/ Nut (SKU: 16422) 16422
Square Bossed Elbowing 3/4"mpt x 5/8"barb Nylon Valve Mounting Bracket w/ Nut.
|
|
|
tg Plastic Oval-Shaped Float w/ Hardware (SKU: 18314) 18314
Plastic Oval-Shaped Float with Hardware for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
Design change note: In the newer kits made after 11/01/14, the long arm pictured will be 2" in length instead of 3".
|
|
|
th Hardware Kit for the Plastic Oval-Shaped Float (SKU: 18313) 18313
The Hardware Kit only for the Plastic Oval-Shaped Float that works on the Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
Design change note: In the newer kits made after 11/01/14, the long arm pictured will be 2" in length instead of 3".
|
|
|
ti Plastic Float Arm Extension (2 per package) (comes in #18313 hardware kit) (SKU: 18636) 18636
Plastic Float Arm Extension (2 per package) (comes in #18313 hardware kit) Used for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
Design change note: In the newer kits made after 11/01/14, the long arm pictured will be 2" in length instead of 3".
|
|
|
tj Plastic Float Arm Cams (2 per package) (comes in #18313 hardware kit) (SKU: 18629) 18629
Plastic Float Arm Cams (2 per package) (comes in #18313 hardware kit) Used for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
|
|
|
tk Plastic Float Arm Thumb Screws (2 per package) (comes in #18313 hardware kit) (SKU: 18630) 18630
Plastic Float Arm Thumb Screws (2 per package) (comes in #18313 hardware kit) Used for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
|
|
|
|
|
 |
|
 |
|
 |
|
 |
|
Please Read Before Ordering: "ABOUT SALES TAXES"
Order Steps:
1. See part on left - Click "more info" to see the part and order it.
2. Quantity
3. Add to cart
4. Checkout
|
|
 |
|
 |
|
