Share your email address with us to signup for newsletters & specials


Parts most often needed for the Ritchie Thriftyking CT6 fountains...
Sort By:
ma 250W / 120V Donut Immersion Heater - non coatedma 250W / 120V Donut Immersion Heater - non coated16311-NC
Non-Coated - It's best to remove immersion heaters from fountains when chance of freezing is over.
mb 250W / 120V Donut Immersion Heater - coatedmb 250W / 120V Donut Immersion Heater - coated16311-C
This Heater is Covered With a Protective Teflon Coating - But it's still best to remove it from the fountain when chance of freezing weather is over.
oc Water Supply Winterize Kitoc Water Supply Winterize KitWSWK
Winterizes Water Supply Lines (2-piece kit)
qaf 2" Silicone Drain Plug (#11) for Thriftykings, some Watermastersqaf 2" Silicone Drain Plug (#11) for Thriftykings, some Watermasters18219
This is the 2" squared-head drain plug used in the Cattlemaster units.
sea 3/4" Female Red Valve (40-60 psi)sea 3/4" Female Red Valve (40-60 psi)12570
3/4" 40-60 psi Red Female float valve which can be used on any fountain that uses the 3/4" female valve. 
seb 3/4" Female Green Valve (60-80 psi)seb 3/4" Female Green Valve (60-80 psi)16419
3/4" 60-80 psi red female float valve which can be used on any fountain that uses the 3/4" female valve. This would mostly be the ThriftyKing CT6. 
sec 3/4" Female Blue Valve (80-100 psi)sec 3/4" Female Blue Valve (80-100 psi)18195
3/4" 80-100 psi blue female float valve which can be used on any fountain that uses the 3/4" female valve. 
sfa Inlet Pkg For 3/4" Female Red Valvesfa Inlet Pkg For 3/4" Female Red Valve18605
3/4" Inlet Package for the Red Female Valve. This piece would be found on the ThriftyKing CT6.
sfb Inlet Pkg For 3/4" Female Green Valvesfb Inlet Pkg For 3/4" Female Green Valve18623
3/4" Inlet Package for the Green Female Valve. This piece would be found on the ThriftyKing CT6.
sfc Inlet Pkg For 3/4" Female Blue Valvesfc Inlet Pkg For 3/4" Female Blue Valve18627
3/4" Inlet Package for the Blue Female Valve. This piece would be found on the ThriftyKing CT6.
sfd 3/4" Valve Plunger Pkg with Button, Nose-piece & Gasketsfd 3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket15259
3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket. This is the only way you can purchase the 3/4" valve plunger with rubber button. 
sfe 3/4" Valve Nosepiece Gaskets (5 per package)sfe 3/4" Valve Nosepiece Gaskets (5 per package)18397
3/4" Valve nose-piece gaskets (5 per package). Used on 3/4" valves throughout the larger fountains. In the old days, this gasket was not used. 
sff 3/4" Valve Rubber Buttons (10 per package)sff 3/4" Valve Rubber Buttons (10 per package)15152
3/4" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item. 
sha Square Bossed Elbowing Float Valve and Constant Flow Heat Valve Assemblysha Square Bossed Elbowing Float Valve and Constant Flow Heat Valve Assembly16464
Square Bossed Elbowing Bracket, Float Valve and Constant Flow Heat Valve Assembly. This is termed as a "Watermaster Valve Assembly" by Ritchie. 
shb Square Bossed Elbowing 3/4"mpt x 5/8"barb Valve Mounting Bracket w/ Nutshb Square Bossed Elbowing 3/4"mpt x 5/8"barb Valve Mounting Bracket w/ Nut16422
Square Bossed Elbowing 3/4"mpt x 5/8"barb Nylon Valve Mounting Bracket w/ Nut. 

tg Plastic Oval-Shaped Float w/ Hardwaretg Plastic Oval-Shaped Float w/ Hardware18314
Plastic Oval-Shaped Float with Hardware for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
Design change note:  In the newer kits made after 11/01/14, the long arm pictured will be 2" in length instead of 3".
th Hardware Kit for the Plastic Oval-Shaped Floatth Hardware Kit for the Plastic Oval-Shaped Float18313
The Hardware Kit only for the Plastic Oval-Shaped Float that works on the Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
Design change note:  In the newer kits made after 11/01/14, the long arm pictured will be 2" in length instead of 3".
ti Plastic Float Arm Extension (2 per package) (comes in #18313 hardware kit)ti Plastic Float Arm Extension (2 per package) (comes in #18313 hardware kit)18636
Plastic  Float Arm Extension (2 per package) (comes in #18313 hardware kit) Used for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6. 
Design change note:  In the newer kits made after 11/01/14, the long arm pictured will be 2" in length instead of 3".
tj Plastic Float Arm Cams (2 per package) (comes in #18313 hardware kit)tj Plastic Float Arm Cams (2 per package) (comes in #18313 hardware kit)18629
Plastic Float Arm Cams (2 per package) (comes in #18313 hardware kit) Used for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
tk Plastic Float Arm Thumb Screws (2 per package) (comes in #18313 hardware kit)tk Plastic Float Arm Thumb Screws (2 per package) (comes in #18313 hardware kit)18630
Plastic Float Arm Thumb Screws (2 per package) (comes in #18313 hardware kit) Used for Watermatic 300, 1000, Omni 3, 5, 10, Cattlemaster 480, 840, 1440, 10T, Watermaster 54, 54D, 90, 96, 600, 1200, ThriftyKing CT 2, 4, 6.
1 2