kq JetFlo Plastic Stock Tank Valve 18141
Ritchie Jet Flo Plastic Stock tank valve.
|
|
na Deluxe Small Fountain Installation Kit DSFIK
Installs Watermatics, Ecofounts, Omni 1,2,3, and CT1 with stainless bolts, ball valve, & insulation for lines
|
|
nb Small Fountain Installation Kit SFIK
Pipe Insulation Not Included - Order # DWMIK if you need insulation too.
|
|
pa 3/4 x 1/2 Ball Valve Kit 34x12BVK
American Made By The Spears Company
|
|
rb Ritchie Mini Water Meter 18218
Know how much water your animal is consuming. The economical Mini Water Meter installs in the 3/8" rubber hose line of smaller fountains between the water source and the float valve.
|
|
saa 1/2" Watermatic Float / Valve Assy (with bracket included) 12WMFVA
1/2" 40-60 psi float valve assembly for the Watermatic 100, 150, 150s&g, Ecofount 1 & 2.
|
|
sab 1/2" Male White Valve (5-40 psi) 12574
1/2" 5-40 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sac 1/2" Male Red Valve (40-60 psi) 12575
1/2" 40-60 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sad 1/2" Male Green Valve (60-80 psi) 13597
1/2" 60-80 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sae 1/2" Valve Bracket Pkg with Screws 11515
1/2" Valve Bracket Package with 4 Bolts/Screws. This bracket bolts to the side of many small fountains and gives you a 1/2" fpt thread to screw your 1/2" float valve into.
|
|
sag 1/2" Valve Rubber Buttons (10 per package) 15151
1/2" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item (10 per package).
|
|
sag 1/2" Valve Wingnut / Screw / Star-washer Pkg 12576
1/2" Valves have a small screw, star-washer, and wingnut that holds the float arm onto the float. It is also where you adjust the float and water level of the fountain. This part is small but necessary.
|
|
sah 1/2" Valve Bracket Pkg with Screws & Washers for StallFount II's 18641
1/2" Valve Bracket Package with 2 screws and washers for the StallFount II's.
|
|
sba 1/2" Male Valve and Elbow Pkg for the CT 1 16899
1/2" float valve and 3/4"mpt x 1/2" fpt elbow (3/4" street ell & 3/4"mpt x 1/2"fpt bushing) which is used in the CT 1 fountain.
|
|
sca 3/4" Watermatic Float / Valve Assy 34WMFVA
3/4" 40-60 psi float valve assembly for the Watermatic 300, 1000, Watermaster 54, 54D, 90, 96, 600, 1200, Cattlemaster 480, 840, 1440, 10T and the Thriftyking CT 2 & 4.
|
|
scb 3/4" Male White Valve (5-40 psi) 16697
3/4" 40-60 psi white float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scc 3/4" Male Red Valve (40-60 psi) 11101
3/4" 40-60 psi red float valve which can be used on any fountain that uses the 3/4" male valve.
|
|
scd 3/4" Male Red Valve w/ 1/8" CF Side Tap (40-60 psi) 11142
3/4" 40-60 psi red float valve with 1/8" constant flow side tap - it could be used on any fountain that uses the 3/4" male valve.
|
|
sce 1/8"mpt x 1/4"comp Brass Angle Needle Pitcock Valve 11793
This is the brass 1/8"mpt x 1/4"comp angle needle pitcock valve used with the 11142 side tapped float valve to make the fountain able to heat itself by the "constant flow" method.
|
|
scf 3/4" Male Green Valve (60-80 psi) 15377
3/4" 60-80 psi greem float valve which can be used on any fountain that uses the 3/4" male valve.
|
|