ob Anchor Bolt Kit Stainless Steel
|
Click to enlarge image(s)
|
Free UPS Shipping!
When you install a piece of equipment that has a 10 year warranty, you need to try to use the type of hardware that will also last 10 years or more. These stainless steel wedge anchors may seem a little bit high to the average customer...but they will be doing their job through all the mud, the blood, and the beer - in other words, they will take the corrosiveness and abuse of manure, urine, water, heat, cold, and time. These parts may be hard to find at your local hardware store so we make them available to you when you are ordering your waterer. The (4) fender washers you see in this photo are the ones you get with the fountain and are not included in this purchase. Make sure you use them in the installation of the waterer.
Position the waterer on the slab, mark where holes should be drilled, drill holes with 3/8" masonry bit 2" deep into slab
|
Drop wedge anchors to the bottom of the holes, install nut on end of bolt to take the abuse, hit wedge anchor firmly with hammer to lock into place.
|
Before bolting down waterer to slab, a fat bead of silicone rubber or pickup camper tape makes a great seal between the waterer and the concrete
|
Bolt the waterer down, tighten clamps on rubber hose line and adjust float level - you're up and running!
|
3/8" x 5" stainless steel wedge anchors and stainless steel fender washers
|
This hardware will ALWAYS LOOK GOOD through the life of the waterer
|
The hardware in this kit is as "forever" as the Ritchie waterer you are buyinig
|
No rusting, corroding, or failure from water, heat, cold, manure, animals rubbing against the waterer
|